Request Information
Indexing Plungers feature a bolt that must be manually disengaged in order to change positioning, thus preventing lateral forces from affecting your locking position. PULL KNOB INDEXING PLUNGERS WITH LOCKING NUTS & LOCKING SLOTS are featured here, in Steel or Stainless Steel with a Thermoplastic Mushroom Knob.
Unit of Measure

Specifications

Type

 N/A Index

Knob

 N/A C

Dimension D

 N/A 6 mm

Dimension L

 N/A 56 mm

Dimension D1

 N/A M12 x 1

Dimension H

 N/A 6 mm

Approximate Spring Force Final Pressure F2

 N/A 14 N

Approximate Spring Force Initial Pressure F1

 N/A 6 N

Dimension D2

 N/A 25 mm

Dimension L1

 N/A 20 mm

F x 30

 N/A 1

Dimension L2

 N/A 8 mm

Dimension L3

 N/A 17 mm

Locking Nut

 N/A No

Locking Slot

 N/A Yes

Dimension Sw1

 N/A 14 mm

Style

Style

 N/A
  • Standard
  • With Locking Nut
  • With Locking Slot
  • With Locking Nut & Locking Slot

Material

Material

 N/A Steel Version -
  • Locking Pin - Hardened Steel (5.8), Black Oxide, Ground
  • Threaded Sleeve - Hardened Steel (5.8), Black Oxide
  • Mushroom Knob - Thermoplastic

Stainless Version -
  • Locking Pin - Stainless Steel (X 46 Cr 13=1.4034), Hardened
  • Threaded Sleeve - Stainless Steel (X 10 CrNiS 18 9=1.4305)
  • Mushroom Knob - Thermoplastic

Note

Note

 N/A Dozens of standard products to choose from a representative sampling of sizes and styles is shown below. Contact EFC International for a complete listing of all available products, options and specific combinations that meet your needs.
Product Catalog