These Long-Lok® Ball-Style Spring Plungers with Hex Sockets have bodies, balls & springs made from Steel and feature the Long-Lok® Thread System for securing the plunger in any position within the threaded hole. Long-Lok®: Clockwise insertion into a tapped hole expands the Long-Lok® System in the opposite direction, increasing the resistance and therefore the amount of torque required for loosening.
Unit of Measure
Specifications
Type |
N/A Ball |
Dimension D |
N/A 3/8-16 |
Dimension L |
N/A 23 mm |
Dimension D1 |
N/A 6 mm |
Dimension H |
N/A 2 mm |
Pressure Type |
N/A Standard |
Approximate Spring Force Final Pressure F2 |
N/A 35 N |
Approximate Spring Force Initial Pressure F1 |
N/A 20 N |
Dimension L1 |
N/A 9 mm |
Approximate Loosening Torque after Third Unscrewing |
N/A 0.60 nm |
Approximate Tightening Torque |
N/A 1.30 nm |
Dimension S |
N/A 3/16 in |
Material |
N/A Stainless Steel 1.4305 |
Ball Material |
N/A Stainless Steel 1.4034 |
Spring Material |
N/A Stainless Steel 1.4310 |
Long-Lok® Thread System Material |
N/A Nylon |
Body Finish |
N/A Natural |