Metal Dart Clips provide a low cost replacement for screws and rivets as they require only a cavity or mounting hole. Dart Clips may be applied from the front or top of a panel and may serve as a solution for blind or limited-access fastening. The spring tension secures the components between the base and knuckles of the clip which can make them ideal for assembling gaskets, name plates, and lightweight panels and components.
Unit of Measure
Specifications
Hole Diameter |
N/A 0.192 to 0.187 in |
Width |
N/A 0.34 in |
Height |
N/A 0.620 in |
Material Thickness (Decimal) |
N/A 0.017 in |
Length Diameter |
N/A 1.69 in |
Features and Benefits
Features and Benefits |
N/A
Dart Clips are pushed into the hole, compressing the hollow prong. The prong then returns to its original shape once it passes through the hole. The amount of clamping action depends on the design of the clip and material thickness for the application. In addition, the surface condition of the hole edge has a definite bearing on the ease with which a metal Dart Clip can be inserted and how well it will fit and hold. For hole sizes that will provide the best combination of easy installation and secure fit, please contact an EFC International Representative. |
