Medium Duty Closed Cushioned Routing Clamps are the most widely used of the loop-type steel clamps. The medium-duty series for bolt sizes 1/4" to 1/2" has one round and one slotted hole for easy alignment. The cushion is made of 1/32" thick Black Vinyl and fully encloses the metal to stay in place during assembly & in service.
Parts on this page are 0.500" to 0.625" wide, in 0.125" through 4.000" Clamp Sizes.
Parts on this page are 0.500" to 0.625" wide, in 0.125" through 4.000" Clamp Sizes.
Unit of Measure
Specifications
Material |
N/A Heavy Duty Galvanized Steel |
Band Finish |
N/A Chemical Treated G90 |
Band Material |
N/A Heavy Duty Galvanized Steel |
Hole Center to End |
N/A 0.312 in |
Hole Center to End (015) |
N/A 0.250 in |
Hole Center to End Tolerance (±) |
N/A 0.015 in |
Clamp Size |
N/A 0.187 in |
Center to Center Length |
N/A 0.500 in0.781 in |
Cushion Material |
N/A Black Vinyl |
Gap |
N/A 0.031 in |
Hole Diameter |
N/A 0.281 in |
Hole Diameter Tolerance (±) |
N/A 0.005 in |
Tolerance (±) |
N/A 0.031 in |
Slot Length |
N/A 0.375 in |
Band W |
N/A 0.500 in |
Strength |
N/A Medium Duty |
Center to Center Tolerance (±) |
N/A 0.031 in |
Gage |
N/A 0.032 in |
Width |
N/A 0.5 in |
Width Tolerance (±) |
N/A 0.010 in |