Simply open the twist, insert the wires or cables, close the twist and insert the dart-type push mount into a pre-drilled hole to secure wires or cable in your application.
Unit of Measure
Specifications
Material |
N/A Nylon 6/6 |
Style |
N/A Dart Type |
Color |
N/A Natural |
| Flammability Rating1 | N/A 94V-0 94V-2 |
Overall Height |
N/A 1.850 in |
Maximum Mounting Hole Size |
N/A 0.192 in |
Minimum Mounting Hole Size |
N/A 0.182 in |
Maximum Panel Size |
N/A 0.090 in |
Minimum Panel Size |
N/A 0.015 in |
Height Above Panel |
N/A 0.750 in |
Maximum Bundle Size |
N/A 0.480 in |
Minimum Bundle Size |
N/A 0.400 in |
Adhesive Material |
N/A RMS-01 |
Pre-Drilled Hole Diameter |
N/A 0.187 in |
Pre-Drilled Hole Diameter Tolarence |
N/A 0.0003 in |
Panel Thickness |
N/A 0.031 to 0.078 in |
Standoff Length |
N/A 3/16 to 1-1/4 in |
Features and Benefits
Features and Benefits |
N/A
These Dart Type Standoff Push Mount Twist Ties lift the wires off of your board, panel or application away from hot components, moving parts or anywhere a separation of wire and panel are required. Note that we offer these to fit in various hole sizes and shapes and with the varied standoff lengths, we can easily solve your routing application. Metric standoff sizes available by special order and may require minimums. Material: Nylon 6/6, RMS-01 is the standard. Flame Retardant Nylon, RMS-19 available by special order. Color: Natural is the standard. Black and other colors available, minimums may apply. |
- 1 by special order
