Request Information
The RIV942 Pull-to-Pressure or Stroke Tool is a spin-pull tool with two different systems of regulation - pressure or stroke. It easily installs SpinTite® and MaxTite® fasteners.
Unit of Measure

Specifications

Thread Type

 N/A Unified

Air Pressure

 N/A 90 psi

Air Use Volume

 N/A 457.5 in³

Maximum Axial Pulling Load at 90 Pound Per Square Inch (psi) Pressure

 N/A 6969 lb

Maximum Stroke

 N/A 0.394 in

Minimum Hose Inside Diameter

 N/A 0.375 in

Weight

 N/A 6.8 lb

For Use With

 N/A 4 to 1/2 in Female and 8 to 5/16 in Male Threaded Inserts

Features and Benefits

Features and Benefits

 N/A The RIV942 offers a hydro pneumatic system and mechanical components that are much more reliable resulting in a tool that works better and lasts longer. Its mandrel, a hardened socket head cap screw, is readily replaced
  • RIV942 Unified Kit includes Tool and Tooling for 6-32, 8-32, 10-32, 1/4-20, 5/16-18 and 3/8-16 Thread Sizes (RIV942-UN)
  • RIV942 Metric Kit includes Tool and Tooling for M4 through M12 Thread Sizes (RIV942-MT)
RIV942 Diagram on this page shows:
  1. Pressure regulation by rotating knob (P) while keeping trigger (L) pushed. Pressure is displayed on manometer (M).
  2. Adjust ring nut (G) for stroke regulation.

Note

Note

 N/A (1) Weight shown with nose piece.
(2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 BAR for the metric tool. Do not exceed these values or tool can be damaged. The use of a pressure regulator is recommended.
Product Catalog