The RIV998V Pneumatic Pull-to-Stroke Spin-Pull Tool easily installs SpinTite® and MaxTite® fasteners.
Unit of Measure
Specifications
Thread Type |
N/A Unified |
Air Pressure |
N/A 90 psi |
Air Use Volume |
N/A 457.5 in³ |
Maximum Axial Pulling Load at 90 Pound Per Square Inch (psi) Pressure |
N/A 4271 lb |
Maximum Stroke |
N/A 0.256 in |
Minimum Hose Inside Diameter |
N/A 0.375 in |
Weight |
N/A 5.3 lb |
For Use With |
N/A 4 to 3/8 in Female Threaded Inserts |
Features and Benefits
Features and Benefits |
N/A
The RIV998V tool has a hydro pneumatic system and the mechanical components of this tool are much more reliable so the tool works better and lasts longer than most other tools. The mandrel, a hardened socket head cap screw, easy to replace. Notes for below chart: (1) Weight shown with nose piece. (2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 BAR for the metric tool. Do not exceed these values or tool can be damaged. The use of a pressure regulator is recommended. |
