Item # 15K200428-06, 0.343 Inch (in) Hole Diameter Heavy Duty Routing Clamp On EFC International

Request Information

Heavy Duty Routing Clamps - Furnished Closed are made for applications that require a heavier or wider steel material.

Unit of Measure

Specifications | Features and Benefits | Note

Hole Center to End	N/A 0.437 in
Hole Diameter	N/A 0.343 in
Hole Diameter Tolerance (±)	N/A 0.001 in
Width	N/A 0.75 in
Thickness (Decimal)	N/A 0.060 in
Diameter Tolerance	N/A 0.015 in
Center to Center Length	N/A 1.375 in
Center to Center Tolerance (±)	N/A 0.031 in
Clamp Diameter	N/A 1.437 in
Clamp Diameter Tolerance (±)	N/A 0.31 in
Gap	N/A 0.093 in
Gap Tolerance (±)	N/A 0.31 in
Hole Center to End Tolerance (±)	N/A 0.015 in
Width Tolerance (±)	N/A 0.010 in
Material	N/A Cold Rolled Commercial Quality (CRCQ) Steel
Finish	N/A Zinc Trivalent Chromate

N/A Heavier, wider steel for heavy duty applications. Single tube, two bolt holes. Clamps Are Formed Closed - Natural Spring Back Allowed.

N/A If opening is necessary for assembly, a closed clamp furnished open should normally be used.

Hole Center to End