Blind Press Nuts with sealed-thread are designed to provide extended thread lengths in thin sheet metal. Press nuts provide a seal against the entrance of dirt's, oils, moisture, and corrosive atmospheres. They are usually more economical to use than nut and screw-type hardware that require elaborate seals and special assembly procedures.
Unit of Measure
Specifications
Thread Size |
N/A M4 x 0.7 |
Dimension C |
N/A 7.95 mm |
Minimum Panel Thickness |
N/A 1 mm |
Maximum Dimension B |
N/A 0.097 mm |
Maximum Barrel Diameter D |
N/A 5.2 mm |
Minimum Full Thread Depth X |
N/A 7.1 mm |
Maximum Dimension Y |
N/A 9.8 mm |
Maximum Shank Diameter A |
N/A 5.38 mm |
Dimension Z |
N/A 11.2 mm |
Minimum Center of Hole to Edge of Panel |
N/A 6.9 mm |
Material |
N/A Carbon Steel |
Features and Benefits
Features and Benefits |
N/A Self-clinching fasteners are pressed into holes in sheet metal by applying a steady squeezing force. This results in the cold-flow of sheet material, which is displaced by the knurl, into the undercut area on the shank of the fastener. Once fully embedded, the knurled area prevents torque-out during tightening of mating part. |
