Self-Clinching Nuts provide strong load-bearing threads in stainless sheet metal as thin as 0.030 inches (0.8mm). All self-clinching fasteners install into a round hole, which may be punched or drilled in ductile materials. They provide a permanently attached fastener, which becomes an integral part of the panel or frame and eliminates the problems associated with loose hardware. Self-Clinching fasteners provide added value by speeding initial assembly as well as servicing in the field, keeping costs to a minimum.
Unit of Measure

Specifications

Thread Size

N/A #8-32

Dimension C

N/A 0.090 in

Maximum Dimension A

N/A 0.03 in

Hole Diameter

N/A 0.213 in

Dimension D

N/A 0.31 in

Minimum Panel Thickness

N/A 0.030 to 0.039 in

Maximum Dimension B

N/A 0.212 in

Minimum Center of Hole to Edge of Panel

N/A 0.27 in

Features and Benefits

Features and Benefits

N/A Self-clinching fasteners are pressed into holes in sheet metal by applying a steady squeezing force. This results in the cold-flow of sheet material, which is displaced by the knurl, into the undercut area on the shank of the fastener. Once fully embedded, the knurled area prevents torque-out during tightening of mating part.
Product Catalog