Request Information
Stepless® Low Profile Clamps have been developed specifically for applications that require minimal external protrusions and a relatively smooth outer surface, and are reusable. They are available in 2 styles; STYLE 1 is for smaller diameters (10.50-19.00mm), has only one Load Retaining Hook and is only available in 905 Stainless Steel. STYLE 2 is for larger diameters (19.50-120.00mm), has two Load Retaining Hooks (pictured below) and is available here in 304 Stainless, or 505, 706, or 906 Stainless directly through EFC International.
Unit of Measure

Specifications

Style

 N/A Style 2 - Original Locktab

Finish

 N/A Plain

Material Thickness (Decimal)

 N/A 0.020 in0.5 mm

Band Width (Decimal)

 N/A 0.197 in5.00 mm

Minimum Clamp Size

 N/A 2.181 in55.40 mm
Material1 N/A 304 Stainless Steel

Features and Benefits

Features and Benefits

 N/A Standard Low Profile Clamps do not possess the ability to adjust to component variation and the effects of thermal expansion. The sealing ability depends to a great extent on the compressive properties that are inherent within the application materials.
Stepless Low-Profile Clamps are reusable. They can be repeatedly opened and reinstalled- for example in the automotive industry at maintenance and service intervals. They can be installed both axially and radially.
  • Low installed height
  • Minimal imbalance on rotating parts
  • 360º Stepless® design- no steps or overlaps on the inner circumference
  • Smooth edged band steel prevents damage to mating components

Note

Note

 N/A A selection of part is available. Please contact your EFC International Representative for additional sizes required.
  • 1 Stainless Steel DIN 1.4301 or UNS S30400 listed here; 505, 706, 905 and 906 available directly through EFC International.
Product Catalog