These Metal Plug Fittings will fit 1/4" DN6 Swing Couplings featured in our Couplings section. They are available with Male or Female thread, or Hose Stem design. Used with the Swing Couplings, they will provide easy and safe connection without force or loss of pressure. Free flow is guaranteed!
Unit of Measure
Specifications
Finish |
N/A Zinc plated |
Thread Type |
N/A HB |
Thread Size (Fractional) |
N/A 5/16 in |
Component |
N/A Plug |
Hose Stem Size |
N/A 5/16 in |
Thread Design |
N/A PUR Compression Fitting |
Plug Size F |
N/A 1/4 in |
Plug Size (Decimal) |
N/A 0.250 mm6.00 mm |
Material |
N/A Surface-Hardened Steel (DIN/ISO CL12L14) |
Standard Temperature Rating |
N/A -20 to +100 ºC-4 to +212 ºF |
Note for Temperature |
N/A Higher is possible depending on media - consult EFC International directly. |
Operating Pressure |
N/A 3 inHg100 mbarUp to 360 psiUp to 25 bar |
Connection and Disconnection Operating Pressure |
N/A Up to 200 psiUp to 15 bar |
Weight |
N/A 0.4 lb |
Applications
Applications |
N/A Throughput Media - Compressed air, gases, liquids and media with low to medium viscosity. |
Additional Information
Additional Information |
N/A
Connection: Push the appropriate plug into the coupling, swing approximately 90º until the orange ring engages in the groove. Disconnection: Pull back the orange ring and swing the plug to the stop position. Remove the plug from the coupling. |
Features and Benefits
Features and Benefits |
N/A
|
