Request Information
These Straight Snap-In Economy Nylon 6/6 Liquid Tight Fittings offer extra cost-savings and are UL approved for use with Liquid Tight Flexible Tubing. They are available in 4 sizes; 1/4", 3/8", 1/2", and 3/4", and provide a low-cost, one-piece solution with smooth internal surfaces for easier wire routing, protection and installation. Their all Nylon 6/6 construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents (note: this feature is not assessed by the UL certification and testing)Optional Black and Gray. Collars also available as listed below, to neaten rough cut tubing ends. Locknuts are listed in the "Liquid Tight Locknuts" section of our catalog.
Unit of Measure

Specifications

Across Flats

 N/A 1.000 in25.40 mm

Mounting Hole Diameter

 N/A 0.875 in22.20 mm

Overall Length

 N/A 1.376 in35 mm

Body Length

 N/A 0.391 in9.90 mm

Fits Conduit Size

 N/A 1/2 in

Nut Thickness

 N/A 0.090 in2.30 mm

Optional Finishing Collar

 N/A 20300402-A07

Color

 N/A Gray

Material

 N/A Nylon 6/6
Temperature Index1 N/A 125 ºC

Flammability Rating

 N/A 94V-2

Industry Standards/Certifications

 N/A Under the Component Program of Underwriter's Laboratories File #E121095.

Features and Benefits

Features and Benefits

 N/A
  • Easy, permanent assembly. The installer twists the tubing over the connector ferrule, until the tubing clicks into place. It's that easy!
  • No tools needed for installation.
  • Unique locking fingers accommodate various chassis thicknesses.

Applications

Applications

 N/A Suitable for a wide array of electrical applications:
  • Commercial and Industrial HVAC Systems
  • Motorized Equipment
  • Enclosed Power Sources
  • Garage Door Openers
  • Major Appliances
  • 1 Maximum Temperature on the part shall not exceed 105 ºC.
Product Catalog