Request Information
These Straight Snap-In Nylon (6/6) Liquid Tight Fittings with Domed Nuts are assembly friendly! The installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut. This completed assembly can then be "snapped" into the chassis with fingertip pressure. They are available in five sizes, 1/4" thru 1" for use with Flexible Conduit and Tubing listed in the "Liquid Tight Flexible Conduit/Tubing" section of our Electrical catalog.
Unit of Measure

Specifications

Mounting Hole Diameter

 N/A 0.500 in12.70 mm

Wrench Flats

 N/A 0.875 in22.20 mm

Body Length

 N/A 0.445 in12.70 mm

Fits Conduit Size

 N/A 1/4 in

Nut Thickness

 N/A 0.219 in5.60 mm

Maximum Overall Length

 N/A 1.500 in38.10 mm

Color

 N/A Black

Material

 N/A Nylon 6/6
Temperature Index1 N/A 125 ºC

Flammability Rating

 N/A 94V-2

Industry Standards/Certifications

 N/A Listed under Underwriter' Laboratories File #E-28430 Certified by Canadian Standards Association File #LR-84579 and #LR-81067

Features and Benefits

Features and Benefits

 N/A
  • No threading of the conduit or tubing required to install. This eliminates the possibility of cutting the conduit and creating leak paths.
  • Complete conduit/fitting system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
  • Suitable for indoor/outdoor use; for original equipment manufacturers or field installers.
  • Resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL certification or testing.
  • Protection class IP 68 up to 70 psi (5 bar) water pressure.

Note

Note

 N/A RU Only
  • 1 Maximum Temperature on the part shall not exceed 105 ºC.
Product Catalog