These Adhesive "C" Style Wire Clip have a low profile design, perfect when clearance is a concern. They also have a large adhesive base for greater holding power. It's material is extruded from 94V-0 for fire and flame resistance.

These "J" Style Wire Clips have a low profile design that is perfect for when clearance is a concern and also have a large adhesive base for greater holding power. They are available in 6 sizes ranging from 0.125 in (3.20 mm) to 0.500 in (12.7 mm).

The 4-Way - Adhesive Type Mounting Bases will allow you to insert the cable tie from all 4 sides. Each mount may be secured with two screws, with adhesive backing, or both, for ease of application and stability. Standard color is white, black is also available.

Adhesive Backed Ratchet Clips can be adjusted to accommodate a variety of bundle diameters or easily be reopened for complete routing adjustments.

Adhesive backed cord clips enable easy access for routing modifications. They hold cords or cables firmly in place and can be used for many applications. Two retaining arms with curved contour safely positions larger cords, cables or wire bundles. Mounting time is reduced with a two-piece per adhesive strip system. The 1/32" thick adhesive strip holds the retaining platform in place.

Flexible Base Adhesive Mounts Releasable Reusable Three Sizes

The flat, wire-extruded Adhesive Flat Wire Twin Clip provides the fastest, most efficient method to route wires. This clip comes in a unique two-per-strip design which allows for ease of installation.

Adhesive Hinged Flat Cable Clips are the fastest, most efficient way to organize flat wires, cords and cables. These UL recognized nylon clips adhere to any smooth, clean and hard surface, including wood, plastic and metal. Wires, cords or cables slip in or out easily, yet are retained securely.

Cable Tie and Edge Clip Assemblies route bundles of wires securing them to the edge of a plastic or metal sheet. With this assembly, there is no need for a mounting hole. The clip easily secures to the panel edge and offers a high extraction force because of the integrated metal clamp that keeps this assembly in place.

The 4 way mounting bases allow you to insert the cable tie from all 4 sides. The 2 way allows you to insert the cable tie from two of the sides. Each mount may be secured with two screws, with adhesive backing, or both, for ease of application and stability. Standard color is white.

Available in 4 sizes to accommodate bundles up to 1/2". Clips are provided an‚ "Two-up" on a rubber based closed cell foam adhesive.

• 4 sizes to Accommodate Bundles up to 1/2"
• Clips are provided Two-up on a Rubber Based Closed Cell Foam Adhesive

Adhesive Mounting Pads mate with cable ties starting at 18 lb tensile strength. The mounts listed are supplied "Two-up" meaning that there are 2 mounts per adhesive pad. This feature reduces installation time as you can simply grasp the mount and pull it off the tape and stick them on your product. There is no fumbling trying to peel off the backing. These parts are also offered with a screw mount center hole.

These Non-Locking Adhesive Clips gather and directs cables singly or in groups smaller than those accommodated by standard Wire Holders. Available in 3 styles.

Quick Lock and Release Adhesive Clips for Round Wire are exceptionally high performance clips with an easy-to-install adhesive mounting system. Made of high-impact and precision injection-molded nylon, the clips are also self-extinguishing. These adhesive clips will not creep or deform, even in higher temperatures. They are available in various sizes ranging from 3/16" to 1". A high sheer load strength rating qualifies these Quick Lock & Release Clips for a wide range of applications in all types of electrical, electronic components and electromechanical equipment.

These Side-Load Adhesive Routing Clips hold single wires whose diameters range from 0.030 in (0.76mm) to 0.060 in (1.5mm). They are extruded from a durable Noryl material and are available in any length to meet your application needs.

Standoff Harness Clips are molded with an adhesive base, and allow you to bundle your wire or cable and quickly adhere it to your application with this one part. The open top on the clip feature allows you to easily add or remove wires or cables as required in your application. This clip allows you to add or remove wires and eliminates the need for a predrilled hole and works on most surfaces.

These Round Wire Top Load Adhesive Tube Clips are a fast, convenient, and low cost means of routing any cable or tubing.

Twist lock adhesive based clamps are made of nylon and are natural in color. The clamps will bundle wire or cable diameters starting at 0.300 up to 0.800. The twist clamp comes with an adhesive base eliminating the need for a predrilled hole and this works on most surfaces. These parts are available without the adhesive - contact customer service for details.

Standoff Twist Tie - Adhesive Mounts are made of nylon and are natural in color. The clamps will bundle wire or cable diameters starting at 0.300 up to 0.500. The standoff lengths are available starting at 0.250 up to 1.00. This clamp comes featuring the adhesive base that eliminates the need for a predrilled hole and works on most surfaces.

Two-Piece Clamps for Flat/Ribbon Cable are perfect for handling flat wire and cable bundle requirements. The adhesive mount nylon clamps offer a secure fastening. There is a non-adhesive version also available for these two-part, flat cable clamps.