The flat, wire-extruded Adhesive Flat Wire Twin Clip provides the fastest, most efficient method to route wires. This clip comes in a unique two-per-strip design which allows for ease of installation.
Unit of Measure
Specifications
Entry |
N/A Top Loading |
Maximum Width |
N/A 1.000 in |
Maximum Overall Length |
N/A 2.031 in |
Maximum Bundle Height |
N/A 0.265 in |
Minimum Bundle Height |
N/A 0.235 in |
Maximum End to Center Notch |
N/A 1.000 in |
Minimum End to Center Notch |
N/A 0.970 in |
Minimum Overall Length |
N/A 1.969 in |
Minimum Width |
N/A 0.968 in |
Material |
N/A Nylon 6/6 |
Color |
N/A Natural |
Weight |
N/A 6.7 lb |
Features and Benefits
Features and Benefits |
N/A
Adhesive-backed flat wire clips are designed with a separation notch at the center of the clip so you can use it for flat extra-wide wire, or easily snap it at the center notch for two identical clips to use with standard-width wire. To install clips, the first clip is peeled away from the release paper. The remaining paper acts as a finger tab to facilitate removal from the second clip. These clips are made from a ridged PVC with an aggressive rubber-based, pressure-sensitive foam adhesive tape. Custom sizes are available, and may require minimum order. For samples or more information, please contact an EFC Sales Engineer. |
