• 90 Degree Sweep Nylon Liquid Tight National Pipe Thread (NPT) Fittings
These 90º Sweep NPT Nylon Liquid Tight Fittings are available in seven sizes from 3/8" through 2" for use with flexible, nonmetallic Liquid Tight Conduit & Tubing listed in the "Liquid Tight Conduit/Tubing" section of the Electrical catalog. They have smooth internal surfaces for easier wire installation around the corner angles. Use of a Sealing Washer may be required for wet locations. Please refer to the "Liquid Tight Sealing Washers" section of the Electrical catalog. In addition, Locknuts can be found in the "Liquid Tight Locknuts" section of our Electrical catalog for ordering information.
1 - 15 of 15 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

Item Name

Mounting Hole Diameter

Thread Length

Maximum Overall Height

N/A 0.875 Inch (in) Mounting Hole Diameter 90 Degree Sweep Nylon Liquid Tight National Pipe Thread (NPT) Fitting N/A 0.875 in22.20 mm N/A 0.52 in13.2 mm N/A 1.982 in73.90 mm
N/A 1.109 Inch (in) Mounting Hole Diameter 90 Degree Sweep Nylon Liquid Tight National Pipe Thread (NPT) Fitting N/A 1.109 in28.20 mm N/A 0.52 in13.2 mm N/A 2.293 in80.50 mm
N/A 0.875 Inch (in) Mounting Hole Diameter 90 Degree Sweep Nylon Liquid Tight National Pipe Thread (NPT) Fitting N/A 0.875 in22.20 mm N/A 0.52 in13.2 mm N/A 1.982 in73.90 mm
N/A 1.109 Inch (in) Mounting Hole Diameter 90 Degree Sweep Nylon Liquid Tight National Pipe Thread (NPT) Fitting N/A 1.109 in28.20 mm N/A 0.52 in13.2 mm N/A 2.293 in80.50 mm
N/A 1.375 Inch (in) Mounting Hole Diameter 90 Degree Sweep Nylon Liquid Tight National Pipe Thread (NPT) Fitting N/A 1.375 in34.90 mm N/A 0.690 in17.50 mm N/A 2.833 in100.60 mm
N/A 1.375 Inch (in) Mounting Hole Diameter 90 Degree Sweep Nylon Liquid Tight National Pipe Thread (NPT) Fitting N/A 1.375 in34.90 mm N/A 0.690 in17.50 mm N/A 2.833 in100.60 mm
N/A 1.734 Inch (in) Mounting Hole Diameter 90 Degree Sweep Nylon Liquid Tight National Pipe Thread (NPT) Fitting N/A 1.734 in44.00 mm N/A 0.710 in18.00 mm N/A 3.950 in116.10 mm
N/A 1.734 Inch (in) Mounting Hole Diameter 90 Degree Sweep Nylon Liquid Tight National Pipe Thread (NPT) Fitting N/A 1.734 in44.00 mm N/A 0.710 in18.00 mm N/A 3.950 in116.10 mm
N/A 1.984 Inch (in) Mounting Hole Diameter 90 Degree Sweep Nylon Liquid Tight National Pipe Thread (NPT) Fitting N/A 1.984 in50.40 mm N/A 0.800 in20.30 mm N/A 4.460 in124.40 mm
N/A 1.984 Inch (in) Mounting Hole Diameter 90 Degree Sweep Nylon Liquid Tight National Pipe Thread (NPT) Fitting N/A 1.984 in50.40 mm N/A 0.800 in20.30 mm N/A 4.460 in124.40 mm
N/A 2.469 Inch (in) Mounting Hole Diameter 90 Degree Sweep Nylon Liquid Tight National Pipe Thread (NPT) Fitting N/A 2.469 in62.70 mm N/A 0.840 in21.30 mm N/A 4.900 in139.60 mm
N/A 2.469 Inch (in) Mounting Hole Diameter 90 Degree Sweep Nylon Liquid Tight National Pipe Thread (NPT) Fitting N/A 2.469 in62.70 mm N/A 0.840 in21.30 mm N/A 4.900 in139.60 mm
N/A 0.875 Inch (in) Mounting Hole Diameter 90 Degree Sweep Nylon Liquid Tight National Pipe Thread (NPT) Fitting N/A 0.875 in22.20 mm N/A 0.300 in7.60 mm N/A 1.700 in73.90 mm
N/A 0.875 Inch (in) Mounting Hole Diameter 90 Degree Sweep Nylon Liquid Tight National Pipe Thread (NPT) Fitting N/A 0.875 in22.20 mm N/A 0.52 in13.2 mm N/A 1.982 in73.90 mm
N/A 0.875 Inch (in) Mounting Hole Diameter 90 Degree Sweep Nylon Liquid Tight National Pipe Thread (NPT) Fitting N/A 0.875 in22.20 mm N/A 0.52 in13.2 mm N/A 1.982 in73.90 mm
1 - 15 of 15 | Results Per Page | View | Unit of Measure
1 
Product Catalog