RIV942 Pull-to-Pressure or Stroke Tools
Blind Threaded Inserts
The RIV942 Pull-to-Pressure or Stroke Tool is a spin-pull tool with two different systems of regulation - pressure or stroke. It easily installs SpinTite® and MaxTite® fasteners.
Unit of Measure
Items |
06ARIV942UN Unified Thread Type RIV942 Pull-to-Pressure or Stroke Tool |
06ARIV942MT Metric Thread Type RIV942 Pull-to-Pressure or Stroke Tool |
06A1701600 RIV942 Pull-to-Pressure or Stroke Tool |
|||
Description | N/A The RIV942 Pull-to-Pressure or Stroke Tool is a spin-pull tool with two different systems of regulation - pressure or stroke. It easily installs SpinTite® and MaxTite® fasteners. | |||||
Thread Type | N/A Unified | N/A Metric | N/A Tool Only | |||
Air Pressure | N/A 90 psi | N/A 6 bar | N/A | |||
Air Use Volume | N/A 457.5 in³ | N/A 7.5 L | N/A | |||
Maximum Axial Pulling Load at 90 Pound Per Square Inch (psi) Pressure | N/A 6969 lb | N/A | N/A | |||
Maximum Axial Pulling Load at 6 bar Pressure | N/A | N/A 31 kN | N/A | |||
Maximum Stroke | N/A 0.394 in | N/A 10 mm | N/A | |||
Minimum Hose Inside Diameter | N/A 0.375 in | N/A 9.5 mm | N/A | |||
Weight | N/A 6.8 lb | N/A 3.1 kg | N/A | |||
For Use With | N/A 4 to 1/2 in Female and 8 to 5/16 in Male Threaded Inserts | N/A M4 to M12 Female and M4 to M8 Male Threaded Inserts | N/A | |||
Features and Benefits |
N/A
The RIV942 offers a hydro pneumatic system and mechanical components that are much more reliable resulting in a tool that works better and lasts longer. Its mandrel, a hardened socket head cap screw, is readily replaced
|
|||||
Note |
N/A
(1) Weight shown with nose piece. (2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 BAR for the metric tool. Do not exceed these values or tool can be damaged. The use of a pressure regulator is recommended. |
N/A
(1) Weight shown with nose piece. (2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 BAR for the metric tool. Do not exceed these values or tool can be damaged. The use of a pressure regulator is recommended. |
N/A
Nose Pieces Sold Separately. (1) Weight shown with nose piece. (2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 BAR for the metric tool. Do not exceed these values or tool can be damaged. The use of a pressure regulator is recommended. |
|||
|