Short Nylon Snap Bushings are insulating feed-through bushings for limited internal clearance applications (minimum 0.125" or 3.20mm). They insulate and isolate electrical or telecommunications cables as well as low RPM shafts and push-pull rods. These bushings are available in 17 sizes for use in mounting holes from 3/16" - 1" (4.70mm - 25.40mm).
Request Information
Unit of Measure
Items
Short Nylon Snap Bushings

0.500 Inch (in) Head Diameter Short Nylon Snap Black Bushing
Short Nylon Snap Bushings

0.945 Inch (in) Head Diameter Short Nylon Snap White Bushing
Short Nylon Snap Bushings

1.060 Inch (in) Head Diameter Short Nylon Snap White Bushing
Short Nylon Snap Bushings

1.060 Inch (in) Head Diameter Short Nylon Snap Black Bushing
Short Nylon Snap Bushings

0.828 Inch (in) Head Diameter Short Nylon Snap Black Bushing
Description N/A Short Nylon Snap Bushings are insulating feed-through bushings for limited internal clearance applications (minimum 0.125" or 3.20mm). They insulate and isolate electrical or telecommunications cables as well as low RPM shafts and push-pull rods. These bushings are available in 17 sizes for use in mounting holes from 3/16" - 1" (4.70mm - 25.40mm).
Material Temperature Index1 N/A 125 ºC
Material N/A Nylon 6/6
Color N/A Black N/A White N/A White N/A Black N/A Black
Head Diameter N/A 0.500 in12.70 mm N/A 0.945 in24.00 mm N/A 1.060 in27.00 mm N/A 1.060 in27.00 mm N/A 0.828 in21.00 mm
Inside Diameter N/A 0.312 in7.90 mm N/A 0.750 in19.00 mm N/A 0.879 in22.30 mm N/A 0.879 in22.30 mm N/A 0.625 in15.90 mm
Mounting Hole Size N/A 0.437 in11.10 mm N/A 0.875 in22.20 mm N/A 1.000 in25.40 mm N/A 1.000 in25.40 mm N/A 0.750 in19.10 mm
Overall Height N/A 0.250 in6.40 mm
Maximum Panel Size N/A 0.062 in1.60 mm
Weight N/A N/A N/A 16.02 lb N/A 16.02 lb N/A 12.46 lb
Flammability Rating N/A 94V-2
Industry Standards/Certifications N/A Recognized under the Component Program of Underwriters' Laboratories File #E15331. Certified by the Canadian Standards Association File #R8919.
Features and Benefits N/A
  • Locking fingers hold securely after only fingertip pressure "snap-in" installation.
  • Locking fingers in fractional increments up to the maximum chassis thickness.
  • Withstands a push back force of 35 pounds.
  • 1 Maximum temperature on part not to exceed 105ºC.
Product Catalog