The RIV998V Pneumatic Pull-to-Stroke Spin-Pull Tool easily installs SpinTite® and MaxTite® fasteners.
Unit of Measure
Specifications
Thread Type |
N/A Metric |
Air Pressure |
N/A 6 bar |
Air Use Volume |
N/A 7.5 L |
Maximum Axial Pulling Load at 6 bar Pressure |
N/A 19 kN |
Maximum Stroke |
N/A 6.5 mm |
Minimum Hose Inside Diameter |
N/A 9.5 mm |
Weight |
N/A 2.4 kg |
For Use With |
N/A M3 to M12 Female Threaded Inserts |
Features and Benefits
Features and Benefits |
N/A
The RIV998V tool has a hydro pneumatic system and the mechanical components of this tool are much more reliable so the tool works better and lasts longer than most other tools. The mandrel, a hardened socket head cap screw, easy to replace. Notes for below chart: (1) Weight shown with nose piece. (2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 BAR for the metric tool. Do not exceed these values or tool can be damaged. The use of a pressure regulator is recommended. |