The Sealed Radius Corner Hex Body Blind Threaded Insert provides all the spin-resistance features of the Standard Radius Corner Hex Body version in punched holes with the addition of a weathertight PVC foam seal bonded to the underside of its head. This seal will withstand 50 PSI (3.4 bars) of pressure. The radius corners of the body of this insert expand during installation to fill the corners of the hex hole, maximizing spin resistance. A backside flange is also formed, even in multiple thicknesses of materials without any need for adjustments. They are available with either standard Open Ends (as pictured), or Closed Ends for leakage protection past the threads, in a variety of corrosion resistant Materials and Finishes listed.
Unit of Measure
Specifications
Material |
N/A Steel 1010/1008 |
Thread Size |
N/A M6 x 1.0 |
Finish |
N/A Tin-zinc with yellow Chromate (400 red Rust) |
Head Outside Diameter |
N/A 12.96 mm |
Grip Call Out |
N/A 6.6 |
Maximum IATD |
N/A 27.56 mm |
Maximum Dimension Ilb |
N/A 23.24 mm |
Thread Call Out |
N/A 610 |
Body Features |
N/A Radius Corner Hex Body |
End Features |
N/A Closed |
Head Features |
N/A Sealed |
Maximum Insert Across Flats D |
N/A 9.50 mm |
Length LB |
N/A 30.23 mm |
Maximum Grip Size |
N/A 4.95 mm |
Minimum Grip Size |
N/A 3.17 mm |
Head Outside Diameter Tolerance (±) |
N/A 0.25 mm |
Mounting Hole Across Flats |
N/A 9.53 mm |
Maximum Corner Radius |
N/A 1.00 mm |
Seal Pressure |
N/A 50 psi3.4 bar |
Weathertight |
N/A Up to 50 psiUp to 3.4 bar |
Restriction of Hazardous Substances Directive Standard |
N/A No |
Industry Standards/Certifications |
N/A International Organization for Standardization (ISO) |
Features and Benefits
Features and Benefits |
N/A
|
Additional Information
Additional Information |
N/A For optimal performance, specify a radius corner in your hex hole to avoid stress fractures and prolong punch and die life, and use these inserts with Grade 5 or Metric Class 8.8/9.8 mating thread-locking screws. PVC Foam Seal is not recommended for use with petroleum based liquids. |