These 1-Ear Clamps have a Mechanical Interlock which is superior to any other joint. Spot welding techniques are not used and therefore the possibility of failure due to corrosion at the spot weld is eliminated. All 1-EAR CLAMPS feature the ear with the "dimple", the simple design difference that not only adds increased strength to the grip of the clamp, but also creates a spring-like action allowing the clamp to "breathe" without loosening. 1-Ear Clamps are used in places where clamping a second ear is impractical, or where a quick, repeatable and compact assembly is important in conjunction with a small clamping range. The lightweight, 7.00 mm version featured on this page is made of austenitic stainless steel for extra strength and anti-corrosive properties. The chemical composition and mechanical properties provide an exceptional combination of ductility and toughness.
Unit of Measure

Specifications

Band Width (Decimal)

N/A 0.275 in7.00 mm

Finish

N/A Plain

Material Thickness (Decimal)

N/A 0.6 mm0.024 in

Maximum Clamp Size

N/A 1.480 in37.60 mm

Minimum Clamp Size

N/A 1.358 in34.50 mm

Weight

N/A 1.05 lb

Material

Material

N/A 304 Stainless Steel

Note for Material

N/A Designated DIN 1.4301 / UNS S30400. This 18% chromium, 8% nickel alloy is practically immune to the neutral salt-spray procedure, and has excellent resistance to many alternative corrosive environments.

Applications

Applications

N/A Low pressure applications such as automotive (not fuel lines), appliances, industrial machinery, underground irrigation systems and beverage dispensing equipment.

Features and Benefits

Features and Benefits

N/A
  • Designed for mass production applications where inexpensive clamps are needed.
  • Mechanical Interlock permits use of pre-coated material.
  • Specially formed strip edges reduce risk of damage to part being clamped.
  • Tampering is visible

Note

Note

N/A Special Installation tools available. Please contact EFC International for more information.
Product Catalog