These Light Duty Cushioned Routing Clamps are closed, furnished open. They have black vinyl cushioning and 2 round holes for fastener sizes #6 through #10. They can be snapped over the tube or wire and closed with the bolt at assembly.
Unit of Measure
Specifications
Finish |
N/A Zinc with Clear Chromate |
Cushion Color |
N/A Black |
Cushion Material |
N/A Vinyl 1/32" Thick, applied by dipping, fully encloses the metal and cannot come off during assembly or in service. |
Hole Center to End |
N/A 0.187 in |
Hole Center to End Tolerance (±) |
N/A 0.015 in |
Center to Center Length |
N/A 0.344 in |
Center to Center Tolerance (±) |
N/A 0.031 in |
Width |
N/A 0.375 in |
Width Tolerance (±) |
N/A 0.010 in |
Gage (G) |
N/A 0.032 in |
Hole Diameter |
N/A 0.172 in |
Hole Diameter Tolerance (±) |
N/A 0.005 in |
Diameter |
N/A 0.187 in |
Gap |
N/A 0.062 in |
Gap Tolerance (±) |
N/A 0.031 in |
Mounting Holes |
N/A 2 Round |
Material |
N/A Cold Rolled Sheet, Commercial Quality (CRCQ) Steel |
