Request Information
These Solid Heavily-Knurled Compression Limitershave a wider area of knurling than the 1 or 2 bands on the Standard Knurled version. Compression Limiters protect the plastic components of an assembly from the compressive loads generated by the tightening of bolts. The Brass Limiters featured on this page are available in 6 sizes, with or without flanged heads, as listed.
Unit of Measure

Specifications

Type

 N/A Compression

Finish

 N/A Plain

Head Outside Diameter

 N/A 18.90 mm

Length (L) (Decimal)

 N/A 6.00 mm

Head Thickness

 N/A 1.60 in

Recommended Hole Size

 N/A 17.60 to 17.70 mm

Material

 N/A Brass

Nominal Bolt Diameter

 N/A M10

Outside Diameter A

 N/A 17.85 mm

Tolerance (±)

 N/A +0.00/-0.15 in

Features and Benefits

Features and Benefits

 N/A
  • Pilot - allows them to stand freely in the hole prior to complete installation
  • Optional Flanged Head - provides a larger load-bearing surface and can eliminate the need for a washer
  • Installation - conventional ultrasonic welders, heat insert drivers, or simply press-in

Note

Note

 N/A Longer and shorter lengths are available on request. Please contact your EFC International representative for Rated Proof Load for these parts.
Product Catalog