Request Information
High Temperature Vinyl Insertion Plugs provide a low-cost, quality masking solution to seal threaded and non-threaded openings. Their high temperature resistant vinyl material withstands up to 475º F (246º C).
Unit of Measure

Specifications

Type

 N/A Insertion

Wall Thickness

 N/A 1/4 in6.35 mm

Withstands High Temperature

 N/A Up to 475 ºFUp to 246 ºC

Material

 N/A High-Temperature Vinyl

Color

 N/A Black

To Fit Metric Thread

 N/A M14

To Fit National Pipe Thread (NPT)

 N/A 1/4

Flange Outside Diameter

 N/A 0.620 in15.7 mm

To Fit Standard Thread

 N/A 1/2

Features and Benefits

Features and Benefits

 N/A
  • Wide flange for easy removal
  • Flexible, yet durable so they won't split, tear or shred
  • Sizes to fit 1/4 through 1-1/4 standard thread openings and M6 through M43 metric threaded holes

Note

Note

 N/A Due to the inherent variability of the dip-molding process, the "Flange OD" may vary by ±1.6mm (1/16") from the below figures. Wall thickness is measured approx. 1/4" (6.35mm) from open end. Wall thickness increases slightly towards the closed end of the part.
Product Catalog