RIV990 Hexcutter Tools allow users to transform round holes to hexagonal holes. This enables a change from standard unified to FM™ full metric inserts.
Unit of Measure
Specifications
Air Pressure |
N/A 90 psi6 bar |
Air Use Volume |
N/A 152.6 in³2.5 L |
Maximum Axial Pulling Load at 90 Pound Per Square Inch (psi) Pressure |
N/A 4271 lb |
Maximum Axial Pulling Load at 6 bar Pressure |
N/A 19 kN |
Maximum Stroke |
N/A 0.236 in6 mm |
Minimum Hose Size |
N/A 3/8 in9.5 mm |
Tool Weight |
N/A 5.07 lb2.3 kg |
Features and Benefits
Features and Benefits |
N/A The RIV990 cuts hex hole sizes for #8-32 to 5/16 inches and M4 to M8. |
Note
Note |
N/A
Nose pieces for each tool are sold separately. Notes for below chart: (1) Tool Weight shown with nose piece. (2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 BAR for the metric tool. Do not exceed these values or tool can be damaged. The use of a pressure regulator is recommended. (3) Tool Weight shown without nose piece. |
