This Thermoplastic P-Clamp has Aluminum Eyelets for extra support and holds 1.125" (28.60) diameter cable bundles.
Unit of Measure
Specifications
Hole Center to End |
N/A 0.250 in6.40 mm |
Hole Center to End Tolerance (±) |
N/A 0.010 in |
Material Thickness (Decimal) |
N/A 1.70 mm0.068 in |
Center to Center Length |
N/A 0.639 in16.20 mm |
Width |
N/A 0.503 in12.80 mm |
Bundle Diameter |
N/A 0.500 in12.70 mm |
Material |
N/A Thermoplastic Heat-Stabilized Nylon 6/6 |
Eyelet Material |
N/A Aluminum |
Note for Eyelet material |
N/A (RMS-82) In accordance with MIL-A-8625 |
Color |
N/A Light Green |
Lower Leg Thickness |
N/A 0.093 in2.40 mm |
Lower Leg Thickness Tolerance (±) |
N/A 0.007 in |
Military Specification (Mil-Spec) |
N/A MS25281-R8 |
Minimum Radius |
N/A 0.250 in6.40 mm |
Dimension R |
N/A 0.062 in1.57 mm |
Dimension R Tolerance (±) |
N/A 0.005 in |
Top Leg Length |
N/A 0.540 in13.70 mm |
Top Leg Length Tolerance (±) |
N/A 0.010 in |
Top Leg Thickness |
N/A 0.065 in1.70 mm |
Width Tolerance (±) |
N/A 0.007 in |
Military Standard Part Number |
N/A MS25281-R18 |
Nominal Diameter (Decimal) |
N/A 0.5 in12.70 mm |
