These Steel and Stainless Steel Self-Clinching Nuts provide strong load-bearing threads in sheet metal and other thin section assemblies. These nuts meet specification features of MIL-N-45938/1. All self-clinching fasteners install into a round hole, which may be punched or drilled in ductile materials. They provide a permanently attached fastener, which becomes an integral part of the panel or frame and eliminates the problems associated with loose hardware. Self-Clinching fasteners provide added value by speeding initial assembly as well as servicing in the field, keeping costs to a minimum.
Unit of Measure
Specifications
Material |
N/A Stainless Steel |
Thread Size |
N/A M10 x 1.5 |
Minimum Panel Size |
N/A 2.30 in |
Dimension B |
N/A 17.35 mm |
Dimension C |
N/A 7.48 mm |
Minimum Hole Center to Panel Edge |
N/A 13.50 mm |
Hole Inside Diameter |
N/A 14.00 mm |
Maximum Dimension A |
N/A 13.94 mm |
Maximum Dimension D |
N/A 2.21 mm |
Fastener Features |
N/A Self-Clinching |
Features and Benefits
Features and Benefits |
N/A
Self-clinching fasteners are pressed into holes in sheet metal by applying a steady squeezing force. This results in the cold-flow of sheet material, which is displaced by the knurl, into the undercut area on the shank of the fastener. Once fully embedded, the knurled area prevents torque-out during tightening of mating part. Thread: Class 2B, MIL - S - 7742; (6H ISO metric) Use In: C - Materials with HRB-80 or less CS - Materials with HRB-70 or less |
