Blind Press Nuts with sealed-thread are designed to provide extended thread lengths in thin sheet metal. Press nuts provide a seal against the entrance of dirt's, oils, moisture, and corrosive atmospheres. They are usually more economical to use than nut and screw-type hardware that require elaborate seals and special assembly procedures.
Unit of Measure
Specifications
Thread Size |
N/A 1/4-20 |
Dimension C |
N/A 0.43 in |
Minimum Panel Thickness |
N/A 0.090 in |
Maximum Dimension B |
N/A 0.087 mm |
Maximum Barrel Diameter D |
N/A 0.305 in |
Minimum Full Thread Depth X |
N/A 0.31 in |
Maximum Dimension Y |
N/A 0.5 in |
Maximum Shank Diameter A |
N/A 0.343 in |
Dimension Z |
N/A 0.56 in |
Minimum Center of Hole to Edge of Panel |
N/A 0.34 in |
Material |
N/A Carbon Steel |
Features and Benefits
Features and Benefits |
N/A Self-clinching fasteners are pressed into holes in sheet metal by applying a steady squeezing force. This results in the cold-flow of sheet material, which is displaced by the knurl, into the undercut area on the shank of the fastener. Once fully embedded, the knurled area prevents torque-out during tightening of mating part. |
