Lay-In Strain Relief Bushings for Split Panel Holes will fit round, flat or multiple cables. Wire range from 0.250 inches up to 0.600 inches. This strain relief secures into a square hole that eliminates rotation.
Unit of Measure
Specifications
Panel Thickness |
N/A 0.100 in |
Mounting Hole Diameter |
N/A 0.875 in |
Cable Shape |
N/A Round |
Mounting Hole Shape |
N/A Split Square |
Overall Length |
N/A 0.800 in |
Maximum Cable Diameter |
N/A 0.600 in |
Material |
N/A Nylon 6/6 |
Color1 | N/A White |
Material Temperature Index2 | N/A 125 ºC |
Flammability Rating |
N/A 94V-2 |
Industry Standards/Certifications |
N/A Recognized under the Component Program of Underwriters Laboratories File #E-15331 Certified by the Canadian Standards Association File #LR-8919. |
Features and Benefits
Features and Benefits |
N/A Lay-In Strain Relief Bushings for Split Panel Holes are assembly friendly. Independent of insertion into the chassis, they are self-locking onto the cable. Thus, they may be pre-assembled offline for final assembly at a later time or remote location, for lower installed cost. Protects against forces of pull, push or twist. |
- 1 Please contact your EFC International Representative for further information.
- 2 Maximum temperature on part not to exceed 105ºC ºC