Request Information
90º Sweep Nylon (PA66) NPT Fittings are designed for use with 16mm thru 67mm flexible, corrugated nylon conduit/tubing. They are Low Fire Hazard all nylon construction for superior protection, and come in 6 NPT thread sizes for use with 7 conduit sizes.
Unit of Measure

Specifications

Thread Size

 N/A 3/4 in

Mounting Hole Diameter

 N/A 1.109 in28.20 mm

Fits Conduit Size

 N/A 28.00 mm

Hub Type

 N/A National Pipe Thread (NPT)

Thread Length

 N/A 0.591 in15.00 mm

Maximum Overall Length

 N/A 1.988 in50.00 mm

Maximum Overall Diameter

 N/A 1.732 in44.00 mm

Color

 N/A Black

Material

 N/A Polyamide Nylon 6/6 (PA66)

Ingress Protection (IP) Rating

 N/A Ingress Protection (IP) 66 standard as per EN60529 IP 66 IP 66, 67, and 68 available consult EFC International directly and specify FPAX fittings.

Flammability Rating

 N/A 94 V2 and is Low Fire Hazard Including Low Smoke, Low Toxicity as well as Halogen, Sulfur, and Phosphorous free.

Industry Standards/Certifications

 N/A Recognized under UL File #E-229161; Approved as per EN50086.

Features and Benefits

Features and Benefits

 N/A
  • Suitable for use with both coarse and/or fine pitch conduit/tubing.
  • Unitary design and assembled shipment allows fast fit.
  • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease and common solvents. This feature is not assessed by UL certification or testing.
  • No threading of the conduit or tubing is required to install.
  • Suitable for use by all original equipment manufacturers.
  • Protection class IP 66 per EN60529 including high pressure water jet from any angle
  • Vibration and tamper resistant, but easily removed with a screwdriver

Note

Note

 N/A Locknuts NOT included. Please refer to the Locknuts section of Electrical Engineering Guide.
Product Catalog