Request Information
90º Sweep NPT Economy Nylon Liquid Tight Fittings are cost-saving and UL approved for use with the Flexible PVC Liquid Tight Conduits found in the "Conduit/Tubing" section of the our Electrical Engineering Guide. They are available in 3 sizes; 3/8", 1/2", and 3/4", and are a low-cost, one piece solution with smooth internal surfaces for easier wire routing, protection and installation around corner angles. Their all nylon construction provides resistance to salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Locknuts are also available. Please refer to the "Liquid Tight Locknuts" section of our Electrical catalog.
Unit of Measure

Specifications

Thread Size

 N/A 3/8 in

Mounting Hole Diameter

 N/A 0.875 in22.20 mm

Overall Height

 N/A 1.754 in44.60 mm

Hub Type

 N/A National Pipe Thread (NPT)

Thread Length

 N/A 0.521 in13.2 mm

Overall Length

 N/A 2.749 in69.80 mm

Fits Conduit Size

 N/A 3/8 in

Flange Outside Diameter

 N/A 31.20 mm1.230 in

Optional Finishing Collar

 N/A 20300400-A07

Color

 N/A Gray

Material

 N/A Nylon 6/6

Flammability Rating

 N/A 94V-2

Ingress Protection (IP) Rating

 N/A NPT Threaded style is liquid tight. (Consult EFC International directly for details)

Features and Benefits

Features and Benefits

 N/A
  • Easy, permanent assembly: the Installer "twists" the Tubing over the Connector ferrule, until the Tubing "clicks" into place. It's that easy!
  • No tools needed for installation.
  • Unique locking fingers accommodate various chassis thicknesses.
  • Suitable for a wide array of electrical applications: -Commercial and Industrial HVAC Systems -Motorized Equipment -Enclosed Power Sources -Garage Door Openers -Major Appliances

Note

Note

 N/A Material Temperature Index: 125ºC Maximum temperature on the part shall not exceed 105 ºC
Product Catalog