These Straight NPT Threaded Economy Nylon Liquid-Tight Fittings offer cost savings and are UL approved for use with Liquid-Tight Flexible Tubing. They are available in 4 sizes; 1/4", 3/8", 1/2", and 3/4", and provide a low-cost, one-piece solution with smooth internal surfaces for easier wire routing, protection and installation. Their all Nylon 6/6 construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents (note: this feature is not assessed by the UL certification and testing) Optional Black and Gray Collars are also available, to neaten rough cut tubing ends, and are listed. Locknuts are listed in the "Liquid-Tight Locknuts" section of our Electrical catalog.
Unit of Measure
Specifications
Temperature Index1 | N/A 125 ºC |
Flammability Rating |
N/A 94V-2 |
Across Flats |
N/A 0.750 in19.00 mm |
Material |
N/A Nylon 6/6 |
Color |
N/A Black |
Mounting Hole Size |
N/A 0.540 in13.70 mm |
Thread Length |
N/A 0.465 in11.80 mm |
Fits Conduit Size |
N/A 1/4 in |
Nut Thickness |
N/A 0.200 in5.10 mm |
Maximum Overall Length |
N/A 1.559 in39.60 mm |
Ingress Protection (IP) Rating |
N/A NTP style is liquid tight |
Industry Standards/Certifications |
N/A Under the Component Program of Underwriters'™ Laboratories File #E121095. |
Features and Benefits
Features and Benefits |
N/A
|
- 1 Maximum Temperature on the part shall not exceed 105ºC.