Heavy Duty Mil-Spec Cable Clamps with Eyelets
Routing Clamps
Heavy Duty Mil-Spec Cable Clamps with Eyelets are qualified to SAE AS25281 and are approved on QPL 23190. The Aluminum Eyelet in the mounting hole spreads the load and provides higher tensile strength in cable management applications where vibration is an issue. These clamps are available in Flat or Ribbed versions. Parts listed on this page are Flat.
Available for use in a wide variety of applications including military, aerospace, marine, industrial equipment, HVAC, appliance and electronics.
Available for use in a wide variety of applications including military, aerospace, marine, industrial equipment, HVAC, appliance and electronics.
Unit of Measure
Items |
34300504-TP10 3/16 Inch (in) Cable Diameter Heavy Duty Clamp with Eyelets |
34300505-TP10 1/4 Inch (in) Cable Diameter Heavy Duty Clamp with Eyelets |
34300506-TP10 5/16 Inch (in) Cable Diameter Heavy Duty Clamp with Eyelets |
34300507-TP10 3/8 Inch (in) Cable Diameter Heavy Duty Clamp with Eyelets |
34300508-TP10 7/16 Inch (in) Cable Diameter Heavy Duty Clamp with Eyelets |
|||||
Description |
N/A
Heavy Duty Mil-Spec Cable Clamps with Eyelets are qualified to SAE AS25281 and are approved on QPL 23190. The Aluminum Eyelet in the mounting hole spreads the load and provides higher tensile strength in cable management applications where vibration is an issue. These clamps are available in Flat or Ribbed versions. Parts listed on this page are Flat. Available for use in a wide variety of applications including military, aerospace, marine, industrial equipment, HVAC, appliance and electronics. |
|||||||||
Screw Size | N/A #10 (M5) | |||||||||
Style | N/A Flat | |||||||||
Color | N/A Light Green | |||||||||
Cable Diameter | N/A 3/16 in4.8 mm | N/A 1/4 in6.4 mm | N/A 5/16 in7.9 mm | N/A 3/8 in9.5 mm | N/A 7/16 in11.1 mm | |||||
Dimension P | N/A 0.250 in6.4 mm | |||||||||
Dimension T | N/A 0.040 in1 mm | N/A 0.040 in1 mm | N/A 0.050 in1.30 mm | N/A 0.062 in1.6 mm | N/A 0.062 in1.6 mm | |||||
Dimension W | N/A 0.500 in12.7 mm | |||||||||
Center to Center Length | N/A 0.498 in12.6 mm | N/A 0.529 in13.4 mm | N/A 0.56 in14.20 mm | N/A 0.592 in15 mm | N/A 0.623 in15.8 mm | |||||
Bottom Leg Thickness | N/A 0.065 in1.65 mm | N/A 0.095 in2.4 mm | N/A 0.095 in2.4 mm | N/A 0.095 in2.4 mm | N/A 0.095 in2.4 mm | |||||
Top Leg Thickness | N/A 0.065 in1.65 mm | |||||||||
Center to End | N/A 0.250 in6.4 mm | |||||||||
Clamp Material | N/A Thermoplastic Heat Stabilized Nylon 6/6 UL94 (RMS-164) Conforms to Mil-M-20693 / ASTM D-4066 | |||||||||
Eyelet Material | N/A Aluminum (RMS-82) In accordance with MIL-A-8625 | |||||||||
Industry Standards/Certifications | N/A Approved & Listed -QPL 23190 Qualified -Society of Automotive Engineering (SAE) AS25281 Restriction of Hazardous Substances (RoHS) | |||||||||
Features and Benefits |
N/A
|
|||||||||
|