• Heavy Duty Mil-Spec Cable Clamps with Eyelets
Heavy Duty Mil-Spec Cable Clamps with Eyelets are qualified to SAE AS25281 and are approved on QPL 23190. The Aluminum Eyelet in the mounting hole spreads the load and provides higher tensile strength in cable management applications where vibration is an issue. These clamps are available in Flat or Ribbed versions. Parts listed on this page are Flat.
Available for use in a wide variety of applications including military, aerospace, marine, industrial equipment, HVAC, appliance and electronics.
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

Item Name

Cable Diameter

Center to Center Length

Bottom Leg Thickness

N/A 3/16 Inch (in) Cable Diameter Heavy Duty Clamp with Eyelets N/A 3/16 in4.8 mm N/A 0.498 in12.6 mm N/A 0.065 in1.65 mm
N/A 1/4 Inch (in) Cable Diameter Heavy Duty Clamp with Eyelets N/A 1/4 in6.4 mm N/A 0.529 in13.4 mm N/A 0.095 in2.4 mm
N/A 5/16 Inch (in) Cable Diameter Heavy Duty Clamp with Eyelets N/A 5/16 in7.9 mm N/A 0.56 in14.20 mm N/A 0.095 in2.4 mm
N/A 3/8 Inch (in) Cable Diameter Heavy Duty Clamp with Eyelets N/A 3/8 in9.5 mm N/A 0.592 in15 mm N/A 0.095 in2.4 mm
N/A 7/16 Inch (in) Cable Diameter Heavy Duty Clamp with Eyelets N/A 7/16 in11.1 mm N/A 0.623 in15.8 mm N/A 0.095 in2.4 mm
N/A 1/2 Inch (in) Cable Diameter Heavy Duty Clamp with Eyelets N/A 1/2 in12.7 mm N/A 0.654 in16.6 mm N/A 0.095 in2.4 mm
N/A 5/8 Inch (in) Cable Diameter Heavy Duty Clamp with Eyelets N/A 5/8 in15.9 mm N/A 0.783 in19.9 mm N/A 0.125 in3.2 mm
N/A 13/16 Inch (in) Cable Diameter Heavy Duty Clamp with Eyelets N/A 13/16 in20.6 mm N/A 0.877 in22.3 mm N/A 0.125 in3.2 mm
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 
Product Catalog