Push-On Thin Wall Shaft Retainers
Shaft & Bolt Retainers
These Push-ons are non-removable thin wall shaft retainers that press over studs or shafts to become an integral part of an axial application. They replace snap or bearing rings, cotter pins, staking, swaging, spinning, heat-forming, ultrasonic, coining, cementing, or upsetting, to eliminate high-cost operations.
Unit of Measure
Items |
01567140-00Q 0.300 Inch (in) Part Diameter Push-On Thin Wall Shaft Retainer |
01T9922016227 0.437 Inch (in) Part Diameter Push-On Thin Wall Shaft Retainer |
70003081 0.750 Inch (in) Part Diameter Push-On Thin Wall Shaft Retainer |
01567099-00Q 0.405 Inch (in) Part Diameter Push-On Thin Wall Shaft Retainer |
01567103-1900Q 0.305 Inch (in) Part Diameter Push-On Thin Wall Shaft Retainer |
|||||
Description | N/A These Push-ons are non-removable thin wall shaft retainers that press over studs or shafts to become an integral part of an axial application. They replace snap or bearing rings, cotter pins, staking, swaging, spinning, heat-forming, ultrasonic, coining, cementing, or upsetting, to eliminate high-cost operations. | |||||||||
Weight | N/A | |||||||||
Finish | N/A Degreased, clean and free of oil; Passivated stainless steel; Soluble oil dipped; Phosphate and oil; Phosphate plus 2 coats of black paint | |||||||||
Material Thickness (Decimal) | N/A 0.022 in | N/A 0.014 in | N/A 0.025 in | N/A 0.022 in | N/A .006 in | |||||
Hole Diameter | N/A 0.192 in | N/A 0.150 in | N/A 0.237 in | N/A | N/A 0.116 in | |||||
Part Diameter | N/A 0.300 in | N/A 0.437 in | N/A 0.75 in | N/A 0.405 in | N/A 0.305 in | |||||
Stud Diameter | N/A 1/5 in | N/A 0.162 in | N/A 0.248 in | N/A 1/5 in | N/A 1/8 in | |||||
Material | N/A 300 Series Stainless Steel (Preferred) | |||||||||
Features and Benefits | N/A Designed without slots or shears, these Push-ons will not "walk-off" or spring free. Their low-profile, flat design makes them ideal for limited access locations. Quality stainless steel assures long life, corrosion resistance, minimal distortion, and a dry finish while eliminating heat treat, finish and handling operations and associated extra costs. | |||||||||
|