This Thermoplastic P-Clamp has Aluminum Eyelets for extra support and holds 1.125" (28.60) diameter cable bundles.
Unit of Measure
Specifications
Hole Center to End |
N/A 0.285 in7.20 mm |
Hole Center to End Tolerance (±) |
N/A 0.045 in |
Material Thickness (Decimal) |
N/A 1.70 mm0.068 in |
Center to Center Length |
N/A 0.983 in25.00 mm |
Width |
N/A 0.553 in14.05 mm |
Bundle Diameter |
N/A 1.125 in28.60 mm |
Material |
N/A Thermoplastic Heat-Stabilized Nylon 6/6 |
Eyelet Material |
N/A Aluminum |
Note for Eyelet material |
N/A (RMS-82) In accordance with MIL-A-8625 |
Color |
N/A Light Green |
Lower Leg Thickness |
N/A 0.108 in2.74 mm |
Lower Leg Thickness Tolerance (±) |
N/A 0.022 in |
Military Specification (Mil-Spec) |
N/A MS25281-R18 |
Minimum Radius |
N/A 0.300 in7.60 mm |
Dimension R |
N/A 0.109 in2.77 mm |
Dimension R Tolerance (±) |
N/A 0.005 in |
Top Leg Length |
N/A 0.605 in15.37 mm |
Top Leg Length Tolerance (±) |
N/A 0.010 in |
Top Leg Thickness |
N/A 0.065 in1.70 mm |
Width Tolerance (±) |
N/A 0.057 in |
Military Standard Part Number |
N/A MS25281-R18 |
Nominal Diameter (Decimal) |
N/A 10.125 in28.60 mm |
