These 90º Sweep NPT Nylon Liquid Tight Fittings are available in seven sizes from 3/8" through 2" for use with flexible, nonmetallic Liquid Tight Conduit & Tubing listed in the "Liquid Tight Conduit/Tubing" section of the Electrical catalog. They have smooth internal surfaces for easier wire installation around the corner angles. Use of a Sealing Washer may be required for wet locations. Please refer to the "Liquid Tight Sealing Washers" section of the Electrical catalog. In addition, Locknuts can be found in the "Liquid Tight Locknuts" section of our Electrical catalog for ordering information.
Unit of Measure
Specifications
Thread Size |
N/A 3/4 in |
Mounting Hole Diameter |
N/A 1.109 in28.20 mm |
Hub Type |
N/A National Pipe Thread (NPT) |
Thread Length |
N/A 0.52 in13.2 mm |
Fits Conduit Size |
N/A 3/4 in |
Locknut Material |
N/A Nylon |
Note for Locknut Material |
N/A Packed Separately |
Maximum Overall Height |
N/A 2.293 in80.50 mm |
Minimum Overall Height |
N/A 3.172 in58.20 mm |
Use Sealing Washer |
N/A 20707003-A030I |
Color |
N/A Black |
Material |
N/A Nylon 6/6 |
Temperature Index1 | N/A 125 ºC |
Flammability Rating |
N/A 94V-2 for nylon fittings only |
Industry Standards/Certifications |
N/A
Canadian Standards Association File #LL-84579 and #LR-81067. Listed under Underwriter's Laboratories File #E-28430. |
Features and Benefits
Features and Benefits |
N/A
|
- 1 Maximum Temperature on the part shall not exceed 105 ºC.